外壳材质：铝

Shell material: Aluminum

外壳尺寸: 长*宽*高=208×90×62毫米

Outline dimension: L*W*H=208×90×62mm

输入接口: 通过IEC 标准

Input socket: meets IEC standard

电源线: 1.5米长

AC wires: 1.5m length

输出线: 1.5米长

DC wire: 1.5m length

净重: 2千克

Net Weight: 2Kg

8. 包装，运输方式和存储方式  Package, transportation & storage

8.1 包装  Package:

   包装盒内有产品名称，型号，生产厂家名称，安全标准，序号，使用说明书以及装箱单。

   There is product name, model, name of manufacturer, safety approval, serial number, User Manual and packing

list in the package box.

8.2运输方式  Transportation：

:

   适用于货车装运，产品需放在阴处，装卸时请小心。

   Suit for transportation by truck, the products should be shielded by tent from sunshine, and loaded and unloaded carefully.

8.3存储方式 Storage：

当产品不使用时，应放在包装盒内。仓库温度应在-40~70℃，相对湿度为5~95%，并且仓库内不能有有害气体，易燃品，爆炸品，腐蚀性等化学物品及强有力的机械震动、冲击和磁场影响。包装盒需放在距离地面至少20cm高，距离墙，热源，和通风口50cm远。充电器在此种存储条件下可以放两年，超过两年须重新检测。充电器必须每三个月通电一次，通电时间应不少于0.5小时。

Products should be stored in package box when it is not used. And warehouse temperature should be -40~70℃, and relative humidity is 5~95%. In the warehouse, there should not be harmful gas, inflammable, explosive products, and corrosive chemical products, and strong mechanical vibration, shock and strong magnetic field affection. The package box should be above ground at least 20cm height, and 50cm away from wall, thermal source, and vent. Under this requirement, product has 2 years of storage period, and should be rechecked when over 2 years.

9.可靠度需求Reliability requirements

MTBF（标准，环境温度，负载要求）≥50K小时；

MTBF (standard, environmental temperature, load requirement) ≥50K hours;

测试条件:25℃,满载，测试通过值。

testing condition: 25℃,full load, testing proved value.

10. 充电曲线

    Charging Curve